,...........,.................. until the desired memory number (01 through 20) appears
i . . ...’ . . . . . . . . . . ............... CI)E = areacode with 3 digits
Nothing is stored ,.....,defauIt (all 20 memory numbers)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AB= [~~~~ : memory number 01 for storage of an area code /a’k[ : memory numb& 20 for storage of an area code
I
Description
For Service Class 3 (see “Toll Restriction” on
page 3-17) up to 20 area codes can be selected
for use in toll dialing.
All area codes except those entered will be
denied.
All the extensions that are programmed for
Service Class Selections 3 are assigned to the
same area code selection plan.
Programming
1.
2.
3.
Dial (14).
“Cls-3 Area Code” will be displayed.
Press the NEXT button.
“Area NO ? --)‘I will be displayed.
Dial the memory number (01 through 20)
or press the NEXT button.
Example:
When dialing (01) or pressing the NEXT
button.
l
The LCD will show“Area-01 : .--” when
nothing is stored in memory number
“01 “.
When area code 212 has been stored,
“Area - 01 : 212” will be displayed.
4. Dial the area code, using 3 digits.
l
To erase a wrong entry, press the CLEAR
button.
5. Press the MEMORY button.
l
The memory indicator will be lit.
6.
l
To advance to the next memory number,
press the NEXT button.
l
To return to the previous memory number,
press the PREV button.
l
To go to the desired memory number,
press the SELECT button and then dial the
memory number.
7. Repeat steps 4 to 6.
8. To return to the initial program mode, press
the END button.
Programming Table.
See
page 7-5.
3-22