Programming
To set System Parameters, Speed Dial or All
Parameters to the default data
;
1.
Dial (99).
“System Clear” will be displayed.
2.
Press the NEXT button.
“Menu : All Para” will be displayed and
“All Para” will blink.
3. Repeat pressing the SELECT button until the
desired data mode is displayed.
4. Press the MEMORY button.
The LCD will stop blinking.
5. Repeat steps 3 to 4, to clear the other system
data.
To set CO Parameter to the default data
;
1. Dial (99).
2. Press the NEXT button.
3. Repeat pressing the SELECT button until the
“CO Para” is displayed.
4. Press the MEMORY button.
“CO NO ?+” is displayed.
5. Dial the CO number (01 through 12).
When dialing (Ol),
“CO NO ? + 01” will be displayed.
6. Press the MEMORY button.
The LCD will stop blinking.
7. Repeat steps 5 to 6, to clear the other CO
parameter. -
To set Extension Parameter to the default data
;
1.
2.
3.
4.
5.
6.
7.
Dial (99).
Press the NEXT button.
Repeat pressing the SELECTbutton until the
“EXT Para” is displayed.
Press the MEMORY button.
“Jack NO ? +” is displayed.
Dial the jack number. (01 through 32)
When dialing (Ol),
“Jack NO ? + 01” will be displayed.
Press the MEMORY button.
The LCD will stop blinking..
Repeat steps 5 to 6, to clear the other extension
parameter.
To set DSS Parameter to the default data
;
1.
Dial (99).
2. Press the NEXT button.
3.
4.
5.
6.
7.
Repeat pressing the SELECT button until the
“DSS Para” is displayed.
Press the MEMORY button.
“DSS NO ? +” is displayed.
Dial the DSS number (1 or 2).
When dialing (l),
“DSS NO ? + 1” will be displayed.
Press the MEMORY button.
The LCD will stop blinking.
Repeat steps 5 to 6, to clear the another DSS
parameter.
After completing clearing, and to return to the
initial mode ;
1.
Press the END button.
3-80