Examples
The outside lines of KX-T123211 is connected 8 CO’s from Central Office (CO).
Extension No 105 (Jack No. 05) is set up beforehand by System Programming as followings.
System Programming
Flexible Outward Dialing Assignment
(Both Day and Night Mode)
Flexible Ringing Assignment
(Both Day and Night Mode)
CO1 through CO7 are “Enable”
CO8 is “Disable”.
CO1 through CO7 are “Enable”
CO8 is “Disable”.
r Trunk Group 1 : COl, C02, CO3
If you connect KX-T30820 at Extension 105 (Jack No. 05) and set the CO button of KX-T30820 as shown in Fig.1,
Outgoing calls and Incoming calls in Extension 105 (Jack No. 05) are operated as followings.
KX-T123211
KX-T30820
Fig.
y!g$F- - Extension no. 105
Change
CO Button on which “COl” is printed- CO3 Button.
CO Button on which ‘CO2” is printed- CO4 Button.
CO Button on which “CO3” is printed . CO5 Button.
0 To change into other CO Button, see
page “To change into other CO
button” on page 4-57.
Outgoing calls:
Pressing CO3 Button t Access CO3 Line
Pressing CO4 Button . Access CO4 Line
Pressing CO5 Button . Access CO5 Line
Dialing FIrI (Trunk group 1) . Access only CO3 Line
Dialing mm (Trunk group 2) . Access only CO4 and CO5 Lines
Dialing mm (Trunk group 3)
l
No access CO Line
You cannot dial through CO1 Line, CO2 Line and
CO6
Line through CO8 Line
Incoming calls:
l
The calls which reaches through the CO3 Line through CO5 Line can be received.
l
The calls which reaches through the CO1 Line, CO2 Line, CO6 Line through CO8 Line can not be received
but can be received with Directed Call Pickup or Direct Inward System Access.
1 The CO Line which is not assigned to the CO Button cannot be dialed or received. 1