To Change into Message Waiting Button
l
Be sure the handset is in the cradle and the
SP-PHONE button is off.
l
Set the MEMORY switch of the KX-T30830 to
“PROGRAM”.
u

lib

Press
DSSll Press
MEMORY
l
After programming DSS 11 button, return
the MEMORY switch to the SET position.
Description
Allows only DSS 11 button of the KX-T30830 to
change into the message waiting button.
The KX-T30830 only is available.
Operation
l
Be sure the handset is in the cradle and the
SP-PHONE button is off.
l
Set the MEMORY switch of the KkT30830
to
“PROGRAM”.
1.
Press the DSS 11 button of the KX-T30830.
2. Dial (3).
3. Press the MEMORY button.
l
After programming DSS 11 button, return the
MEMORY switch to the
SET”
position.
l
For operation, refer to Message Waiting on
page
4-37.
- ?_
0 Be sure the handset is in the cradle and the
SP-PHONE button is off.
l
Set the MEMORY switch of the proprietary
telephone to
“PROGRAM”.
DEF
/oi
,
AUTO

3

-0

al

MEMORY
Dial 3 Continue to dial Press
CO numbers MEMORY
which you
want to ring
(01 through 12)
l
After programming CO Line Ringing
Selection,return the MEMORY switch to the
“SET”
position.
Description
Through programming the CO numbers, you
can select whether the extension ring or not
when an outside call reaches through the CO
line.
Program the CO numbers which you want to
ring.Flexible Ringing Assignmenton page
3-54
should be set to Enable.
Operation
l
Be sure the handset is in the cradle and the
SP-PHONE button is off.
l
Set the MEMORY switch of the proprietary
telephone to
“PROGRAM”.
1.
Dial (3).
2. Continue to dial the CO numbers want to ring
(01 through
12).
3. Press the MEMORY button.
l
After programming CO Line Ringing
Selection, return the MEMORW switch to the
“SET”
position.
Conditions
0
0
As all programmed CO numbers are not
displayed, press the + (FWD/DND) or c
(CONF) button for scrolling the Display.
When an outside call reaches through the CO
line doesnt ring, the CO indicator will flash. If
you want to answer the outside call, press the
flashing CO button.
4-62