Sets the starting time on a week day basis, when “Automatic”is selected in program [006]
“Time (Day/Night/Lunch) Service Changing Mode”.
*1To assign every day of the week to one selection,press the button.
*2If the SELECT button is pressed, the display will show the previous entry. If the previous
setting was “None”, press the SELECT button to enter the starting time. If you do not
need to change the time service, keep pressing the SELECT button until “None” is
displayed. For example, if Monday’s day mode is set to “None”, the day mode will not be
turned on Monday.
Default Everyday – Day – 9:00 AM / Night – 5:30 PM /
Lunch-S (starting) – None / Lunch-E (ending) – None
• Feature Reference
Section 3, Features
Time (Day/Night/Lunch) Service
System Programming 4-9
4.2 System Programming [007]-[008]

[007] Time (Day/Night/Lunch) Service Start Time

7
0
0
NEXT
SELECT
(Sun···Sat)
(1···12)
*2
hour or
SELECT
NEXT
PREV
or or
(Every day) (Day/Night/
Lunch-S/Lunch-E)
(AM/PM)
(00···59)
SELECT
STORE
minute
END
<If you press the SELECT button>
To go to another mode
*1
☞
Assigns an extension port number for the operator.
Default Jack-01
• Feature References
Section 3, Features
Operator / Manager Extension, Operator Call
extension port no.

[008] Operator Assignment

8
0
0
NEXT
STORE
END
(01
···
24)
☞
PSQX1708ZA-06E.QX 99.10.15 10:33 AM Page 9