• Be sure the handset is on the cradle and the SP-PHONE button is off.
• To program,set the MEMORY switch on the proprietary telephone to “PROGRAM”.
• After programming, return the MEMORY switch to the “SET” position.
• 2.2 Telephone Features,“Call Information/Log, Incoming”
• 2.2 Telephone Features,“Call Log, Incoming”
2.1 Proprietary Telephone Settings
Operations 2-3

Caller ID Selection Button (Assignment)

Allows you to assign a Flexible line key as the Caller ID Selection button. The Caller ID
Selection button can be used in the following cases.
1) Confirming a caller’s information while receiving a call or during a conversation
2) Checking the number of logged calls
3) Informing you when no more caller’s information can be logged by lighting the
indicator
PT
Press the desired Flexible CO button
you wish to assign as the Caller ID
Selection button.
Dial 7.
7
Press STORE.
AUTO DIAL
STORE
CO
• The STORE indicator lights.
• The display shows the initial programming
mode.
<PT Display Example>
CID Selection
☞
!
!
PSQX1744ZA-2(E).QX 99.10.15 9:46 AM Page 3