2-6 Operations
2.2 Telephone Features
Checking
Display Operation (— for the KX-T7130 only)
When the Caller ID Indication button indicator is red,there are new
calls logged.
1. Press the Caller ID Selection button to confirm the number of
logged calls.
<Example>
If there are 2 unchecked calls and 3 checked calls:
• The above information will be displayed for 3 seconds.
2. Press the Caller ID Indication button while on-hook to see the
incoming call information.
• The new information that you have not checked will be
displayed first.
3. You can check another caller’s information by pressing the Caller
ID Indication button again.
After displaying all of the new information, the old information you
have already checked will be displayed.
• To modify the telephone number, use the HOLD button to erase
from the first digit. “0 to 9, , # and PAUSE”can be used to
add numbers from the first digit.
• To clear the displayed information, press the TRANSFER button.
• To clear all logged call information, go off-hook and press 70 #.
The display shows as follows.
• To return to the initial display, go off-hook and on-hook, or wait
for 20 seconds.
• Pressing the Caller ID Selection button provides you with further
information about the party.
The display changes as follows.
<Example>
If the information is stored in log 03,
— caller’s name
— caller’s number
— date and time
• If “OUT OF AREA” is displayed, the call may be from out of
the calling area.
• If “LONG DISTANCE” is displayed, it may be a long distance
call.
• If “PRIVATE”is displayed, the caller chose not to show their
information.
03:30Oct 09:00PM
03:0011223344
03:BOB HANKS
CID Log Clear
New:02 Old:03
01:0111111111
02:0924773333
PSQX1744ZA-2(E).QX 99.10.15 9:46 AM Page 6