6-4 Troubleshooting
6.3 While Operating
PROBLEM PROBABLE CAUSE POSSIBLE SOLUTION
When using the
speakerphone with a
proprietary telephone,
KX-T7130, nothing is
heard.
The unit does not ring.
During a power failure,
the extension connected
to port number 01 or 09
does not operate.
Making an outside call
cannot be performed.
A tone type single line
telephone (SLT) user
cannot make a call.
The HANDSET/HEADSET
selector on the KX-T7130
is set to the “HEADSET”
position.
The Ringer Volume
Selector is set to “OFF”.
A proprietary telephone is
connected to the port.
The corresponding line key
does not exist on the
proprietary telephone.
There may be something
wrong with a DTMF
receiver.
Set the HANDSET/HEADSET selector
to the “HANDSET” position.
Set to “HIGH” or “LOW”.
Disconnect the proprietary telephone
and connect a single line telephone.
Program the line key. See the Flexible
Button Assignment.
(☞Operating Instructions,
1.2 Proprietary Telephone Settings,
“Customising the Buttons on Your
Telephone”)
1. Select “Enable” for DTMF receiver 1
and “Disable” for DTMF receiver 2 in
program [107].
2. Make a call using a tone type SLT
connected to one of extension ports
01–08.
3. If you cannot make the call, the
problem may have been caused by
DTMF receiver 1. If the call can be
made, go to step 4.
4. Try DTMF receiver 2. Select
“Disable” for DTMF receiver 1 and
“Enable” for DTMF receiver 2 in
program [107], and make another call.
If you cannot make the call, the
problem may have been caused by
DTMF receiver 2. If the call can be
made, go to step 5.
5. Check the other 4 DTMF receivers in
the same way. Refer to program
[107].
PSQX1708ZA-14E.QX 99.10.15 1:11 PM Page 4