4-16 System Programming
[103] 4.2 System Programming

DTMF signals

Call State
Ringback Tone
Busy Tone
Reorder Tone
DND
Answer
Forwarded to
Voice Processing
System
(Ringing)
Forwarded to
Voice Mail (Busy)
Forwarded to
Extension
Confirmation Tone
Disconnect
Conditions
When an extension a VPS has dialled is ringing.
When an extension a VPS has dialled is busy.
When a VPS dials an invalid extension number or when a VPS
is accidentally connected to another Voice Mail Port.
When an extension a VPS has dialled sets the DND (Do Not
Disturb) feature.
When an extension which a VPS has dialled answers the call.
When a called extension is forwarded to a VPS,the call can be
forwarded to another available VPS. In this way,the first VPS,
typically an Auto-Attendant,can release the call to another
VPS and receive another incoming call.
When a called extension is forwarded to a VPS and no VPSs
are available to receive the call.
When a called extension is forwarded to another,non-VPS
extension.
When a VPS has successfully turned a message waiting lamp
on or a message waiting lamp off.
When the calling party disconnects.
Code
1
2
3
4
5
6
7
8
9
#9
Enables or disables the system to send codes (DTMF signals) to the extension(s) assigned as
the Voice Mail Port in program [102] “Voice Mail Port”. These DTMF signals indicate the
state of the call (busy,answered, ringing, disconnected,etc.) in addition to the normal call
tones. They also enable the Panasonic Voice Processing System (VPS) equipment
(KX-TVP100) to immediately recognise the current state of the call and speed up the call
handling.
Default Disable
• The table on next page describes the codes (DTMF signals),call state and conditions for
the DTMF integration operation.
• Select “Plan 1” or “Plan 2” in program [009] “Extension Number Assignment”, and select
“Enable” in this program to enable the DTMF integration.
• This feature greatly improves the performance of the Panasonic KX-TVP100:Voice
Processing Systems which have been programmed for Inband Signalling. For more
information about Inband Signalling, refer to your Voice Processing System manual.
• Feature Reference
Section 3, Features
Voice Mail Integration for KX-TVP100
1
STORE
END
0
SELECT
3
!
!

[103] DTMF Integration for KX-TVP100

NEXT
☞
(Enable/Disable)
PSQX1708ZA-07E.QX 99.10.15 10:34 AM Page 16