4-66 System Programming
[519]-[521] 4.2 System Programming
Assigns the length of time the system holds an incoming outside call via the UCD feature
when all extensions in the UCD group are busy. When the programmed time expires,the
call will be intercepted or disconnected according to program [523] “UCD Busy Mode”.
* Waiting time:1 through 32 (minutes) / 1 through 59 (seconds)
Default 10 minutes
• Feature Reference
Section 3, Features
Uniform Call Distribution (UCD)
2
5

[521] UCD Busy Waiting Time*1

NEXT
1
STORE
END
waiting time*
Assigns one extension group which works as the UCD group.
Default Extension group number 1
• Feature Reference
Section 3, Features
Uniform Call Distribution (UCD)
(1···8)
[520] UCD Group*1
2
5
NEXT
0
STORE
END
extension group no.
☞
☞
Assigns the length of time from answering a call with the DISA feature and sending the
DISA outgoing message or a beep. During the assigned length of time, the system will not
receive DTMF signals.
Default 0 second
• Feature Reference
Section 3, Features
Direct Inward System Access (DISA)

[519] DISA OGM Mute Time

1
5
NEXT
9
STORE
END
SELECT
(0/2/4/6 sec)
☞
*1: Required only when the optional OGM/FAX Detection
Card is installed.
SELECT
(min/sec)
PSQX1708ZA-10E.QX 99.10.15 1:06 PM Page 66