3-18 Features
C3 Features
Call Transfer – to Extension
Allows an extension user to transfer a received call,an intercom or an outside call, to
another extension. Two types are available.
Screened Call Transfer: Announces the call to another extension before completing
the transfer.
Unscreened Call Transfer:Immediately releases the call to another extension without an
announcement.
• If the destination extension does not answer the call within the assigned time in program
[201], the call will return to the transferring party.
• An outside call can be transferred to an extension by simply pressing a DSS button. It
requires program [005].
• If Music on Hold is enabled, music is sent to the original external caller while being
transferred. Sending a cyclic tone or music on hold can be programmed by program
[111].
• During a 5-party conference, the user cannot transfer a call.
• Required System Programming
[005] One-Touch Transfer Using a DSS Button
[111] Hold Music Selection
[201] Transfer Recall Time
• Related Feature References
Conference (5-party), Hold,Music on Hold
• Operating Instructions Reference
1.5 During Conversation,“Transferring a Call to an Extension (Call Transfer – to
Extension)”
!
!
☞
☞
Allows an extension user enabled in program [606] to transfer a received intercom call to an
external party.
• A single line telephone user cannot transfer a received call to an external party.
• To join the conversation again after transferring the call,press the corresponding line key.
A conference call will be established. This feature is not available for a single line
telephone.
• Required System Programming
[606] Call Transfer to an Exchange Line
• Related Feature Reference
Hold, Limited Call Duration
• Operating Instructions Reference
1.5 During Conversation,“Transferring a Call to an Exchange Line (Call Transfer – to
Exchange Line)”
Call Transfer – to Exchange Line
!
!
PSQX1708ZA-04E.QX 99.10.15 10:31 AM Page 18