![](/images/new-backgrounds/1237009/23700973x1.webp)
Answering System Features
2Select K, then press ,.
3Select “Record”, then press ,.
4Select “Record Memo”, then press
,.
LHold the handset about 20 cm away and speak clearly into the microphone.
5Press Zto stop recording.
6Press {ih}.
Note:
LVoice memos are treated as new messages.
Memory capacity
The total recording capacity (including your greeting message, caller messages, voice memos, audible call announcements, and recorded conversations) is about 30 minutes. A maximum of 64 messages can be recorded.
LIf message memory becomes full, “Full” is displayed. To record additional messages, you will need to erase unnecessary messages.
LMessages are retained even if a power failure occurs.
Using direct commands
You can operate the answering system by pressing dial keys, rather than navigating through the menus. To use the following commands, press $(centre of joystick), select K, then press ,.
Key | Direct commands |
{1} | Repeat message (during |
| playback)*1 |
{2} | Skip message (during |
| playback) |
Key | Direct commands |
{3} | Enter the “Setting TAM” |
| menu |
{4} | Play new messages |
{5} | Play all messages |
{6} | Play greeting message |
{7}{4} | Record memo message |
{7}{6} | Record greeting message |
{8} | Turn answering system on |
{9} | Stop (recording, playback) |
{0} | Turn answering system off |
{*}{4} | Erase this message (during |
| playback) |
{*}{5} | Erase all messages |
{*}{6} | Erase greeting message |
*1 If pressed within the first 5 seconds of a message, the previous message will be played.
37