Paging/Intercom

Conference

During a call using the handset, you can make an intercom call to another handset and then combine the calls together to establish a conference call between handsets registered to the same base unit.

1Handset 1:

During a call, press I N T . Then enter the desired handset number.

The call is put on hold.

If there is no answer, press I N T to return to the call.

2Handset 2:

When the unit rings, press to answer.

3Handset 1:

Press 3 to establish a conference call.

4Handset 1 or 2:

Press to hang up the conference call.

Setting the Call Waiting Tone

If an incoming call has been received during an intercom between handsets, a call waiting tone sounds. You can choose whether or not this tone will sound. The factory preset is ON.

1Press PROG .

2Press G or F until “F24 ” is displayed.

3Press O K .

The current setting is displayed. 1: ON 0: OFF

Ex. ON

F24U i

4Press G or F to select the desired setting.

You can press 0 or 1 to select OFF or ON.

5Press PROG .

A confirmation tone sounds and the display will return to the stand-by mode.

38

Page 38
Image 38
Panasonic KX-TCD951EB operating instructions F24U, Paging/Intercom Conference, Setting the Call Waiting Tone