Special Features
How to Use the Pause Feature
(For Analog PBX Line/Long Distance Service Users)
We recommend you press | R D L if a pause is required for dialling with a PBX or to access a long |
distance service. |
|
Ex: Line access number 9 | (PBX) |
9 ➡ R D L ➡ Phone number
•Pressing R D L once creates a pause.
This prevents misdialling when you redial or dial a stored number.
• Pressing R D L more than once increases the length of the pause between numbers.
Setting the pause timing
You can set the pause timing to 3 seconds or 5 seconds, depending on your PBX requirements. The factory preset is 3 seconds.
Make sure that the power is ON (p. 12) and the unit is in the
Chapter 2 Basic
1Press PROG then I N T .
2Press 3 .
3Enter the base unit password (p. 23).
•The factory preset is 0000.
4Press 3 .
•The current timing is displayed.
1: 3 seconds 2: 5 seconds
Ex. 3 seconds is selected.
33u i
5To select 5 seconds, press 2 .
OR
To select 3 seconds, press 1 .
6Press PROG .
•A confirmation tone sounds and the display will return to the
•If 5 beeps sound in step 3, the entered password is incorrect. Enter the correct password.
Operations
19
