Setting the Password

You can program a 4-digit password for both the handset and base unit individually. Each factory preset is 0000. Changing the password may prevent the unauthorised use of your unit by another person.

Once you have programmed the password, you cannot confirm it. We recommend you write down the password. If you forget it, please consult your nearest Panasonic Service Centre.

On the handset

You need to enter the password when using the functions, such as “Setting the call prohibition” (p. 25), “Clearing the settings in handset memory” (p. 29) and “Cancelling a base unit” (p. 33).

1Press PROG .

2Press G or F until “F5 ” is displayed, then press O K .

F5o - - - -

3Enter the current handset password.

The factory preset is 0000.

4Enter the new 4-digit password TWICE.

F5o - - - - o - - - -

If you misdial, press C . Digits are erased from the right.

A confirmation tone sounds and the display will return to the stand-by mode.

If 5 beeps sound in step 3, the entered password is incorrect. Enter the correct password.

On the base unit

You need to enter the password when using the functions, such as “Setting the dialling mode” (p. 13), “Setting the pause timing” (p. 19), “Setting the earth/time break recall mode”

(p. 21), “Setting the call restriction” (p. 26), “Clearing the settings of the base unit memory” (p. 29), “Registering a handset in the base unit” (p. 31), “Cancelling a handset” (p. 33) and “Setting the bell selection” (p. 34).

1Press PROG then I N T .

2Press 5 .

5o - - - -

3Enter the current handset password.

The factory preset is 0000.

5o - - - - o - - - -

4Enter the new 4-digit password TWICE.

A confirmation tone sounds and the display will return to the stand-by mode.

Chapter 3 Advanced Operations

23

Page 23
Image 23
Panasonic KX-TCD951EB operating instructions Setting the Password, F5o - - o