Speed Dialling, Dialling a Stored Number | Panasonic KX-TCD951EB

Speed Dialling

Storing Phone Numbers in Memory

You can store up to 20 telephone numbers in the handset.

Make sure that the power is ON (p. 12) and the unit is in the stand-by mode.

1Press G or F until a desired memory station number (00 to i9 ) is displayed.

•You can enter the desired memory station number after pressing G or F.

00 -

2Press PROG .

3Enter a phone number, up to 24 digits.

00 - 3334444

•If you misdial, press C . Digits are erased from the right. To erase all digits, press C firmly.

4Press PROG .

•A confirmation tone sounds and the display will return to the stand-by mode.

•To store other numbers, repeat steps 1 through 4.

•If a pause is required for dialling, press

R D L where needed. Pressing R D L counts as one digit (p. 19).

•To cancel during programming, press PROG , then start from step 1.

•If your line has rotary or pulse service, any

access numbers stored after pressing will not be dialled.

Memory card

Use the memory card on page 43 as a name or phone number index for speed dialling. Cut out the card and attach it in a convenient place.

To erase a stored number

1Press G or F until the desired phone number is displayed.

•You can enter the desired memory station number (00 to i9 ) after pressing G or F.

2Press PROG .

3Press C .

4Press PROG .

Dialling a Stored Number

1Press G or F until the desired phone number is displayed.

•You can enter the desired memory station

number (00 to i9 ) after pressing G or F.

• To exit the speed dialler memory, press C .

2 Press .

•The number is automatically dialled.

18

Image 18

Panasonic KX-TCD951EB Speed Dialling, Storing Phone Numbers in Memory, Dialling a Stored Number, To erase a stored number

Contents

Operating Instructions Charge the batteries for about 4 hours before initial use Important Information Ringer Equivalence Number RENMethod of connection Page Before Initial Use Battery Charge For Best PerformanceBase Unit Location Contents Selecting the Stand-by Mode Correct Use and Charging Location of Controls Base unitHandset Display SettingsInstalling the Batteries in the Handset Icons Telephone Line Cord Settings ConnectionsHooks To Mains Outlet AC 230-240 V, 50 Hz USE only with Panasonic AC Adaptor KX-TCA9E or KX-TCA11E Recharge Battery strengthBattery information Fully charged Medium Low Press P W R Settings Turning the Power onDisplay Power Button PWR Current connected base unit number is displayed Ensure that the dialling mode is selected tone Selecting the Dialling ModePress Prog then I N T Enter the base unit password Press F23U Settings Selecting the Handset Ringer Volume/PatternRinger volume Ringer pattern 22u2 Selecting the Base Unit Ringer VolumePress the desired volume level 1 , 2 , 3 or Press Prog then I N T Press 2 Twice I2345678 To select the receiver volumeMaking Calls 888800 00 To redial after confirming the numbers in redial memory Answering CallsTo redial the last number dialled To turn the handset ringer off temporarily Dialling a Stored Number Speed DiallingStoring Phone Numbers in Memory To erase a stored number Setting the pause timing Special FeaturesHow to Use the Pause Feature Press Prog then I N T Enter the base unit password p For Rotary or Pulse Service Users Special Features Handset LocatorSetting the Key Lock To cancel the key lock 32u Using the Recall FeatureSelecting the earth option/time break recall mode To accept the waiting call and hang up the existing call Summary of Programmable Functions F5o - - o Setting the PasswordF5o 5o - - o Direct Call Setting the Direct Call ModeTo turn OFF the direct call mode F42 F4 Io To turn OFF the call prohibition modeCall Prohibition F4 IO0 When you dial a restricted number To cancel the call restricted handsetsTo cancel the call restriction numbers Call Restriction F25U0 Other Programmable SettingsF2 iU F26U F32U Other Programmable Settings Selecting the Talk Mode DisplayPress G or F to select to select the desired setting I234567890 Clearing the Settings in Memory Function For Optional Multi-Unit Users Operating More than One HandsetOperating More than One Base Unit F7 io RegistrationF7 iU Registering a Handset in the Base Unit Specified base unit access Registration Selecting the Base Unit AccessAutomatic base unit access I000 Enter the handset numbers you want to cancel Cancelling a HandsetCancelling a base unit Press O K Enter the handset password p F3 i0 Selecting the Stand-by Mode DisplayBell Selection Iu2 Selecting first handset Iu3I03 i23456 Selecting all handsets Paging All Handsets from the Base Unit Paging/Intercom888800 00 0 Intercom between Handsets Transferring a call using the intercom Transferring a Call from One Handset to AnotherTransferring a call without the intercom Paging/Intercom Conference Setting the Call Waiting ToneF24U Press Prog Press G or F until F24 is displayed Press O K Replacing the Batteries Replaceshown. the batteries with new ones as Using the Belt Clip Replacing the BatteriesTo remove the belt clip Problem Remedy Before Requesting HelpUnit does not work Does not function Be included when rediallingBefore Requesting Help You cannot redial You cannot register the handset in the base unit Installations Environment Safety InstructionsSafety Placement Adding Another Phone Term Definitions Model No. KX-TCD951EB Panasonic Business Systems U.KReceipt No Date of Purchase Serial No Sales Department Panasonic Business Systems U.K ManufacturerPQQX12191ZB-UK WU0699MK2079