Before Requesting Help
Problem | Remedy |
You cannot program function items such as the dialling mode.
•Programming is not possible while the unit is in the talk or intercom mode.
•Do not pause for over 60 seconds while programming.
You cannot store a phone number in memory.
•You cannot store a phone number while the unit is in the talk or intercom mode.
•Do not pause for over 60 seconds while storing.
While programming function items or | • To answer the call, lift the handset or press | . | ||
storing numbers, the unit starts to ring. | Start again from the beginning after hanging up. | |||
|
|
| ||
does not function. | • The handset is too far from the base unit. |
| ||
| • The handset is engaged in an outside call. Wait until | |||
| the in use indicator ( | ) light goes out. |
| |
|
|
|
| |
You cannot redial. | • Access numbers entered after pressing |
| will not | |
| ||||
| be included when redialling. |
|
•If the last number dialled was more than 24 digits long, the number will not be redialled.
The paged handset does not answer.
•The handset is not in the same radio area.
•The handset is engaged in an outside call.
•The handset has been cancelled or has not been registered. Register the handset in the base unit (p. 31).
While using the intercom, two tones | • A call is being received. To answer, press |
sound. | twice. |
|
|
The unit misdials when connected to a | • Check the pause function (p. 19). |
PBX. |
|
42