Base Unit Settings
18
Call optionsSelecting area codes to be
deleted automatically
In some situations, phone numbers stored
automatically in the Caller ID list (page 19)
will include area codes. If you do not want to
dial the area codes when making calls from
the Caller ID list, you can store the area
codes which you want the unit to delete
automatically.
Example:You have stored the area code
“09”. If you make a call from the Caller ID
list to the phone number “09-456-7890”,
the unit dials “456-7890”.
1{j/OK} i “Base Unit Setup” i
{>}
2“Call Options” i {>}
3“Area Code” i {>}
4Enter an area code (5 digits max.). i
{j/OK} i {ih}
Note:
LThe use of this feature can prevent a
National Call from being dialled. E.g., in
the case of the South Island, the “03” will
be omitted and will therefore prevent a
National Call to other areas of the South
Island.
Setting call restriction
You can restrict selected handsets from
dialling certain numbers. You can assign up
to 6 phone numbers to be restricted, and
select which handsets will be restricted.
Storing area codes here will prevent the
restricted handsets from dialling any phone
number in that area code.
1{j/OK} i “Base Unit Setup” i
{>}
2“Call Options” i {>}
3“Call Restrict” i {>}
4Enter the base unit PIN (default:
“0000”).
5Set which handsets will be restricted by
pressing the desired handset number.
LAll the registered handset numbers
will be displayed.
LFlashing numbers indicate call
restriction is turned on for the
corresponding handset.
LTo turn call restriction off for a handset,
press the number again. The number
will stop flashing.
6{j/OK}
7Select a memory location. i {>}
8Enter the phone number or area code to
be restricted (8 digits max.). i
{j/OK} i {ih}
LTo erase a restricted number, press
{C/T}.
TG1831NZ(e-e).book Page 18 Thursday, June 1, 2006 4:34 PM