Yamaha YSP-1000 owner manual Manual Setup, Sound Menu, Beam Menu, Input Menu, Display Menu

MANUAL SETUP

To achieve the best quality surround sound, you can use MANUAL SETUP to fine-tune the listening environment parameters, as well as to make advanced settings for speaker positions, sound beams, digital input and the OSD. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your own listening environment.

y

•You can save the settings optimized by the AUTO SETUP procedure (see page 36). A set of settings optimized according to specific conditions of your listening environment can be recalled later depending on the varying conditions of your listening environment (see page 37).

•Most of the parameters in SOUND MENU and BEAM MENU are automatically set when you run AUTO SETUP (see page 28). Use SOUND MENU and BEAM MENU to make additional adjustments.

•BEAM MENU allows you to make settings for the surround sound effects normally available in the speaker settings menu.

•Make settings for the parameters in BEAM MENU first before you make settings for the parameters in SOUND MENU, INPUT MENU and DISPLAY MENU.

SOUND MENU

Use to manually adjust various parameters related to the sound output.

Item	Features	Page
TONE CONTROL	Adjusts the output level of high-frequency or low-frequency sound.	74
BEAM LEVEL	Adjusts the output level of each beam.	75
SUBWOOFER SET	Adjusts the various subwoofer settings.	75
MUTE LEVEL	Adjusts the muting level.	76
AUDIO DELAY	Adjusts audio delay.	76
ROOM EQ	Adjusts the tonal quality of the listening room.	76
DD/DTS Dynamic Range	Adjusts the dynamic range of Dolby Digital or DTS signals.	76

BEAM MENU

Use to manually adjust various parameters related to the sound beam output.

Item	Features	Page
SETTING PARAMETERS	Adjusts listening room and listening position settings.	70
BEAM ADJUSTMENT	Adjusts various beam settings.	71
IMAGE LOCATION	Adjusts the position of the front left and right speakers.	74

INPUT MENU

Use to manually adjust various parameters related to the audio and video input.

Item	Features	Page
INPUT ASSIGNMENT	Assigns jacks according to the component to be used.	77
INPUT MODE	Selects the initial input of the source.	77
INPUT TRIM	Adjusts the input level of the source.	78
INPUT RENAME	Renames the displayed input source.	78

DISPLAY MENU

Use to manually adjust various parameters related to the display.

Item	Features	Page
DIMMER SET	Adjusts the brightness of the display.	79
OSD SET	Adjusts the display position and the background color of the OSD.	79
UNIT SET	Changes the display unit of measurement.	79

68