SELECTING THE INPUT MODE
You can select the type of audio input signals of the selected input source according to your preference or the conditions of the input source.
y
We recommend setting the input mode to AUTO in most cases.
STANDBY/ON |
| POWER | POWER |
|
| AV | TV |
DVD | VCR | STB | TV |
TV
INPUT1 INPUT2 MACRO
AUX
(
) INPUTMODE SLEEP
YSP
1Press one of the input selector buttons on the remote control to select the desired input source.
DVD VCR STB TV
AUX |
2Press INPUTMODE on the remote control repeatedly to toggle between input modes.
INPUTMODE
TV AUTO | DVD AUTO | AUX AUTO |
TV DTS | DVD DTS | AUX DTS |
TV ANALOG |
|
|
When TV or STB | When DVD is | When AUX is |
is selected as | selected as the | selected as the |
the input source | input source | input source |
• AUTO
Automatically selects audio input signals in the following priority order:
1)Dolby Digital or DTS
2)PCM
3)Analog
Use this input mode in most cases.
• DTS
Selects only digital signals encoded in DTS. Compared to AUTO, this input mode provides greater stability while playing back CDs or LDs encoded in DTS.
• ANALOG
Selects only analog signals.
Even when both digital and analog signals are input simultaneously, only analog signals are selected.
Notes
•When the input mode is set to AUTO, this unit automatically plays back
•ANALOG cannot be selected as an input mode if analog signals are not being input from the selected input source.
y
You can adjust the default input mode to be selected when the power of this unit is turned on (see page 77).
Notes
•The input mode of VCR is fixed to ANALOG. However, if the TV OPTICAL IN jack of this unit is assigned to VCR, AUTO, DTS and ANALOG become available as the input mode of VCR (see page 77).
•ANALOG is not available as the input mode of DVD and AUX.
86
