MANUAL SETUP
HORIZONTAL ANGLE (Horizontal angle)
Use to adjust the horizontal angle of beams for each speaker. By adjusting the horizontal angle of the beams, you can optimize the sound beam paths. A test tone is automatically output.
( ) | (+) |
(+) | ( ) |
Choices: L90° to R90°
Adjust towards L (left) to move the direction of the output to the left and adjust towards R (right) to move it to the right.
a)HORIZONTAL ANGLE 1/5
|
|
|
| 5 BEAM | ||||||
Front L | L90 |
|
|
|
|
|
| R90 | ||
|
|
|
|
|
| |||||
| L60deg. |
|
|
|
|
|
| |||
|
|
|
| * |
|
|
| |||
|
|
|
|
| 0(deg) | |||||
|
|
|
| |||||||
[p | p | p | p |
| [ENTER]:Return |
| |
VERTICAL ANGLE (Vertical angle)
Use to adjust the vertical angle of sound beams for each speaker. By altering the beam path, you can optimize sound beam angles.
0°
Choices:
Initial setting: 0°
•Adjust towards – (minus) to move the angle downward.
•Adjust towards + (plus) to move the angle upward.
b)VERTICAL ANGLE 1/5
|
| 5 BEAM | ||
Front L |
| (+) |
| |
0deg. |
|
| 0deg | |
|
| |||
|
|
|
|
|
|
| |||
|
|
|
|
|
[p | p | p | p |
| [ENTER]:Return |
| |
Note
A test tone is automatically output.
BEAM TRAVEL LENGTH (Beam travel length)
Use to set the distance that sound beams travel after being output and reflected off the wall until they arrive at the listening position for each speaker.
The lines in the illustration below indicate the distance.
Choices: 0.3 m to 24.0 m
•Front L adjusts the distance the front left speaker sound beams travel.
•Front R adjusts the distance the front right speaker sound beams travel.
•Center adjusts the distance the center speaker sound beams travel.
•Surround L adjusts the distance the surround left speaker sound beams travel.
•Surround R adjusts the distance the surround right speaker sound beams travel.
c)BEAM TRAVEL LENGTH
5 BEAM
. Front L;;;;;;;7.1m
Front R;;;;;;;7.1m
Center;;;;;;;;3.0m
Surround L;;;;10.0m
Surround R;;;;10.0m
[p | p | p | p |
[ENTER]:Return
72
