Target mode
Outputs sound beams in a single channel. This mode is ideal if you do not want the sound beams to be reflected on the walls in your listening room or if you do not disturb others asleep while enjoying music or movies at night.
In addition, you can adjust the horizontal angle of the sound beams so that you can hear dialogues clearly even from a distant location such as the kitchen area in your listening room.
BEAM MODE
Press TARGET on the remote control to select
the target mode and then press 
/ 
to adjust the angle.
Control range: L90° to R90°
•Press 
repeatedly to increase the horizontal angle on the left side.
•Press 
repeatedly to increase the horizontal angle on the right side.
TARGET
5
ENTER
VOL |
|
OPERATION | BASIC |
Notes |
|
•The sound beams are not rebounded off the walls in your listening room.
•If the target mode is selected as the beam mode, the surround modes (see page 46), the CINEMA DSP programs (see page 51) and the TruBass (see page 58) become ineffective. In addition, no audio is output from the subwoofer connected to this unit.
English
45
