Yamaha YSP-1000 owner manual Enjoying Surround Sound, Decoder indicators

ENJOYING SURROUND SOUND

■Decoder indicators

Depending on the input source and the selected surround mode, the indicators in the front panel display light up as follows:

Status	Indicator
When PCM signals are being		PCM
input
When DTS digital signals are
being input or when DTS Neo:6
is selected
When Dolby Digital signals are		DIGITAL
being input
When Dolby Pro Logic is			PL
selected
When Dolby Pro Logic II is			PL
selected

y

•You can select an input mode (AUTO, DTS or ANALOG) by pressing INPUTMODE on the remote control repeatedly (see page 86).

•Discs encoded in DTS-ES or Dolby Digital 5.1 EX will be played back in DTS or Dolby Digital.

■Surround modes and recommended sources

Surround mode		Recommended
		source
Dolby Pro Logic	–	All sources
	Movie	Movies
Dolby Pro Logic II	Music	Music
	Game	Games
DTS Neo:6	Cinema	Movies
	Music	Music

Notes

•Surround modes are available when the beam mode is set to a setting other than the stereo or the target mode.

•When you select an input source (see page 39), the surround mode used for the previously selected input source is selected.

•If the power of this unit is turned off and on again, the surround mode used for the previously selected input source before the power was turned off is selected.

•The surround modes are available only when the CINEMA DSP programs are turned off (see page 55) or when the movie program is selected as the CINEMA DSP program (see

page 54).

•Only Dolby Pro Logic, Dolby Pro Logic II Movie and DTS Neo:6 Cinema are available when the movie program is selected as the CINEMA DSP program (see page 54).

•If the surround modes are not available, “Prohibit” appears in the front panel display when you press SURROUND on the remote control.

•The surround modes are available only when 2-channel signals are being input. If you try to switch between the surround modes when 5.1 channel signals are being input, “Prohibit” appears in the front panel display.

46