5Press 
/ 
to select USER1, USER2 or USER3 and then press ENTER.
The following screen appears on your TV.
ENTER | ENTER |
|
2)MEMORY SAVE
USER1 Save Now?
6Press ENTER again.
The new parameters are saved as USER1, USER2 or USER3. Once the parameters are saved, the display returns to the SET MENU screen.
2)MEMORY SAVE
ENTER | USER1 Saving ! |
SET MENU
. ;MEMORY ;AUTO SETUP ;BASIC SETUP ;MANUAL SETUP
p | p |
USING THE SYSTEM MEMORY
Loading settings
You can recall the settings saved in “Saving settings” on page 36 according to the varying conditions of your listening environment.
1Press YSP on the remote control to switch to the operation mode of this unit.
YSP
2Press MENU on the remote control.
The SET MENU screen appears on your TV.
SET MENU
MENU
. ;MEMORY ;AUTO SETUP ;BASIC SETUP ;MANUAL SETUP
p | p |
y
•The control buttons used for SET MENU are displayed on the bottom of the screen.
•To return to the previous screen while using SET MENU, press RETURN on the remote control.
•To resume cursor button operations after changing the control area by pressing an input selector button, press TEST on the remote control.
•To cancel the SET MENU screen, press MENU once more.
•You can also perform the following operations in the front panel display.
•If you press an input selector button during the SET MENU operations, the cursor buttons become ineffective. In this case, press TEST once.
SETUP
7Press MENU to exit.
The SET MENU screen disappears from your TV.
MENU
English
37
