Preparation
10
Display language
1{j/OK}
2Press {^} or {V} to select “Handset
Setup”. i {>}
3Press {^} or {V} to select “Display
Setup”. i {>}
4Press {^} or {V} to select “Select
Language”. i {>}
5Press {^} or {V} to select the desired
language. i {>} i {ih}
Note:
LIf you select a language you cannot read,
press {ih}, press {j/OK}, press {^} 3
times, press {>}, press {V} 2 times, press
{>}, press {V}, press {>}, select the
desired language, press {>}, then press
{ih}.
Date and time
1{j/OK}
2Press {^} or {V} to select “Handset
Setup”. i {>}
3Press {^} or {V} to select “Set Date &
Time”. i {>}
4Enter the current day, month, and year.
Example: 17 May, 2006
{1}{7} {0}{5} {0}{6}
5Enter the current hour and minute.
Example: 3:30 PM
{0}{3} {3}{0} i Press {*} until
“03:30 PM” is displayed.
6{j/OK} i {ih}
Note:
LTo correct a digit, press {<} or {>} to
move the cursor, then make the
correction.
LThe date and time may be incorrect after a
power failure. In this case, set the date
and time again.
TG1831NZ(e-e).book Page 10 Thursday, June 1, 2006 4:34 PM