flashing. If keytones are turned on (page 15), a confirmation tone will be heard.
Cancelling a handset
A maximum of 6 handsets can be registered to the base unit. A handset can cancel its own registration (or the registration of another handset) that is stored in the base unit. This will allow the base unit to “forget” the handset.
1{j/OK} i“Base Unit Setup” i {>}
2Enter “335”.
3“Cancel Handset” i{>} LThe numbers of all handsets
registered to the base unit are displayed.
4Select the handset(s) you want to cancel, by pressing the desired handset number. i{j/OK}
LThe selected handset number(s) will flash.
LTo cancel a selected handset number, press the number again. The number will stop flashing.
5“Yes” i{>} i{ih}
Increasing the range of the base unit
You can increase the signal range of the base unit by using a DECT repeater. Please use only the Panasonic DECT repeater noted on page 4. Consult your Panasonic dealer for details.
Important:
LBefore registering the repeater to this base unit, you must turn the repeater mode on.
LDo not use more than one repeater at a time.
Setting the repeater mode
1{j/OK}i“Base Unit Setup” i {>}
2“Other Options” i{>}
3“Repeater Mode” i{>}
4“On” or “Off” i{>} i{ih}
Note:
LAfter turning repeater mode on or off, w will flash on the handset momentarily. This is normal. The handset can be used once w stops flashing.
Intercom between handsets
Intercom calls can be made between handsets.
Example: When handset 1 calls handset 2
1Handset 1:
{INT} iPress {2} (desired handset number).
2Handset 2:
Press {C} / {s} to answer.
3When finished talking, press {ih}.
Transferring calls between handsets
Outside calls can be transferred between 2 people.
Example: When handset 1 transfers a call to handset 2
1Handset 1:
During an outside call, press {INT}. i Press {2} (desired handset number). LThe outside call will be put on hold. LIf there is no answer, press {INT} to
return to the outside call.
22
