Storing Caller List Information in the Directory
You can store phone numbers that are in the Caller List into the directory.
Make sure the unit is not being used and the handset is lifted off the base unit.
1
2
Press Ö or Ñ to enter the Caller List.
Scroll to the caller you want to store in the directory by pressing Ö or Ñ, and press á.
•If the number requires editing, see page 31.
10 new calls GF H=Directory
TURNER,CINDY
HEdit
Save directory
GF H=Yes
Basic
3 Scroll to “Save directory” by pressing Ö or Ñ, and press á.
•A beep sounds.
•To continue storing other items, repeat from step 2.
•To exit the programming mode, press (OFF).
If there is no name information for the caller, “Enter name” will be displayed.
a)If a name is not required, press Ö
(Next key) and press á (Save key).
b)If a name is required, enter the name (p. 37). When finished, press Ö (Next key) and press á (Save key).
•A beep sounds.
•To continue storing other items, repeat from step 2.
•To exit the programming mode, press (OFF).
Edit
HSave directory
GF H=Yes
TURNER,CINDY
Enter name
IH G=Next
Enter name
CINDY TURNER
IH G=Next
CINDY TURNER
Operation
•You can exit the programming mode any time by pressing (OFF).
•If the display shows “Directory full” in step 3, press (OFF) to exit the list. To erase other stored items from the directory, see page 42.
•You cannot store caller information in the directory if a phone number is not displayed.
•If an alarm tone sounds in step 3, the item cannot be stored in the directory. Place the handset on the base unit and try again from step 1.
For assistance, please call: | 33 |