Press á.
Enter your access number, up to 32 digits.
•You may enter pauses*(see page 44).
•Each time you press (HOLD/INTERCOM/CLEAR), a digit is erased.
To erase all digits, press and hold (HOLD/INTERCOM/CLEAR).
Press Ö (Next key).
•If you want to edit the entered number, press Ñ (Edit key) and return to step 6.
Press á (Save key).
•A beep sounds.
•To exit the programming mode, press (OFF).
Press á.
Scroll to “Save VM acces#” by pressing
Press (FUNCTION).
Voice Mail Service
Voice mail service is an electronic on-line answering system offered by your telephone company. After subscribing, the voice mail system can answer calls automatically for you when your line is busy or if calls are not answered, and caller can leave their messages at the voice mail box virtually located at the telephone company. After the voice mail box has received messages, the unit will indicate it in two ways:
(a)“Voice mail” displayed on the handset, and (b) the VM indicator on the base unit will flash.
To use this feature, you must first store your access number.
Storing a Voice Mail Access Number
Make sure the unit is not being used and the handset is lifted off the base unit.
1
2 Scroll to “Program” by pressing Ö or Ñ.
3
4
Öor Ñ.
5
6
Ringer tone HProgram
--------------
Set flash time HSave VM acces# VM tone detect
1234567PPP890
IH G=Next
1234567PPP890
F=Edit H=Save
1234567PPP890
Save VM access#
•You can exit the programming mode any time by pressing (OFF).
For assistance, please call: 1-800-211-PANA(7262) | 43 |