4
5
6
7
Scroll to “VM tone detect” by pressing
Öor Ñ. Press á.
Select “On” or “Off” by pressing Ö or Ñ.
Press á (Save key).
•A beep sounds.
•To exit the programming mode, press (OFF).
Save VM acces# HVM tone detect Set line mode
VM tone detect :On
GF H=Save
VM tone detect :Off
•You can exit the programming mode any time by pressing (OFF).
Listening to Voice Mail Messages
After the voice mail box has received messages, the unit will indicate it in two ways: (a) “Voice mail” displayed on the handset, and (b) the VM indicator on the base unit will flash.
To listen to your voice mail message(s), follow the steps below.
1 | Press (FLASH/CALL!WAIT/VOICE!MAIL), and press | or |
| . |
| ||||
| ||||
•The unit is connected to the telephone line and dials the access number (p. 43). | ||||
2 | Follow the |
|
|
|
3 | When finished, press (OFF). |
|
|
|
•If “Voice mail” still remains on the display or the VM indicator still flashes even if you have listened to your voice mail message(s), press (FUNCTION), and press and hold (HOLD/CLEAR) until the unit beeps.
“Voice mail” will disappear and the VM indicator will turn off.
•If your voice mail service uses a voice mail tone and the recorded message is over 3 minutes long, “Voice mail” may not be displayed and the VM indicator may not flash.
•If your voice mail service uses a voice mail tone, the tone will be heard from any parallel connected phone. If you use another phone to retrieve messages, you have to dial your access number manually.
Advanced Operation
For assistance, please call: | 45 |
