Making Calls
To put a call on hold
Press (HOLD/CLEAR).
•“Line on hold” is displayed.
•The IN USE/CHARGE/HOLD indicator on the base unit flashes.
•If you put a call on hold for more than 6 minutes, an alarm tone will sound. The call will be disconnected after a total of 10 minutes.
To release the hold
Lift the handset, or press 
or 
.
•If another phone is connected on the same line (p. 53), you can also release the hold by lifting its handset.
To adjust the receiver volume (HIGH, MEDIUM or LOW) or speaker volume (6 levels) while talking
To increase, press Ñ.
To decrease, press Ö.
•The display will return to the length of the call.
While using 
•Each time you press Ö or Ñ, the volume
level will change among 3 levels (HIGH, HIGH MEDIUM or LOW). Your phone comes from
the factory set to level MEDIUM.
Loud
Low ❚ ❚ ❚ ❚ ❚ ❚ High
Ñ Ö
MEDIUM
Loud
Low ❚ ❚ ❚ ❚ ❚ ❚ High
Ñ Ö
While using 
•Each time you press Ö or Ñ, the volume level will change among 6 levels. Your phone comes from the factory set to level 3.
Loud
LOW
Low ❚ ❚ ❚ ❚ ❚ ❚ High
Ex. Speaker volume: level 6
Loud
Low ❚ ❚ ❚ ❚ ❚ ❚ High
•When you replace the battery, the selected receiver/speaker volume setting will return to the factory set. Reprogram if necessary.
24
