IBM 19K5716 manual Creating a connection using both B channels

Note: Since the NDIS WAN CAPI drivers are installed, you have the option of using “CAPIWAN (ISDN1)” or “CAPIWAN (ISDN2)” for the Internet connection. However, the choice depends on the Internet access software you want to use.

5.In the next window, enter the phone number to dial your access provider.

6.Finally, click Finish.

Creating a connection using both B channels

This technique is also referred to as "multilinking". To create a connection in Windows NT 4.0 using both bB channels, do the following:

1.Create a new Dial-Up Networking connection as described in “Creating a connection using one B channel” on page 86.

If the option Multilink all ISDN lines appears during the setup, do not activate it. This option may result in malfunctions due to an improper configuration.

2.Once the new connection has been completed, click More and select Edit entry and modem properties in the drop-down menu.

11. Implementations of the IBM International ISDN PC Card 93