IBM 19K5716 manual Checking and installing Remote Access Service

In this case, click Exit and select the entry for the adapter marked with a red X. Select the menu command Actions / Stop. Remove the adapter from the PCMCIA slot. Open the \EXTRAS/CW52NT\RegUpd directory on the IBM International ISDN Pc Card Installation Software CD and select the IBMISDN.REG file.

Double-click the file and confirm that you want to update the Windows NT Registry by clicking OK when prompted. Now reinsert the adapter. CardWizard should display a message letting you know the ISDN PC card is successfully inserted.

The evaluation version of SystemSoft's CardWizard 5.20 provided on the IBM International ISDN PC Card support Web page does not exhibit this problem.

Your IBM International ISDN PC Card is now ready to use with any CAPI 2.0- compliant application software.

Checking and installing Remote Access Service

To install the NDIS WAN CAPI device drivers, you must have Remote Access Service installed. To check whether Remote Access Service (RAS) is installed on your notebook computer, proceed as follows:

1.Double-click the My Computer icon on the Windows NT 4.0 desktop, then double-click Dial-Up Networking.

2.If the phone book displays, then RAS is properly installed on your computer and you can continue with the section Installing the NDIS WAN CAPI

7. Installing the device drivers in Windows NT 4.0 39