After restarting, your system is ready for the NDIS WAN device driver installation.

Installing the NDIS WAN CAPI drivers

1.Click Start -> Settings -> Control Panel and double-click the Network icon.

2.Click the Adapters tab, then the Add button. In the Select Network Adapter window, click Have Disk. In the Insert Disk window, type the complete path to the NDIS device driver location. The NDIS WAN CAPI Drivers are located on the CD in the directory \WINNT\NDIS. If your CD-ROM drive has the letter E, for example, enter the path E:\WINNT\NDIS. Then click OK.

3.Click OK again in the Select OEM Option window. In the NDIS WAN CAPI Driver Properties window you can enter the desired MSNs (Multiple Subscriber Numbers) of your ISDN line for each B-channel. You might also leave these fields blank for now and click OK. You can add an MSN setting later.

4.After the NDIS WAN CAPI Device Driver installation has completed and you have clicked OK, Setup starts the Remote Access Setup utility. Click Add and install the ISDN1 - CAPIWAN device by clicking OK. Repeat this step again to install the ISDN2 - CAPIWAN device.

42IBM ISDN PC Card:User’s Guide

Page 60
Image 60
IBM 19K5716 manual Installing the Ndis WAN Capi drivers