IBM 19K5716 manual Installing the device drivers in Windows Me

6. Installing the device drivers in Windows Me

The device drivers for the IBM International ISDN PC Card are installed in two steps:

1.Install the CAPI 2.0-compliant device drivers

2.Install the NDIS WAN CAPI device drivers

Installing the IBM International ISDN PC Card in Windows Me

To install the IBM International ISDN PC Card in Windows Me, proceed as follows:

1.Turn off the computer, choose a PCMCIA slot and insert the IBM International ISDN PC Card into this slot without the ISDN cable attached.

2.Turn the computer back on. The New Hardware Wizard opens and reports that it has detected an ISDN-CARD.

3.Now insert the CD labeled IBM International ISDN PC Card Installation Software into your computer CD-ROM drive.

4.Since Windows Me cannot find the proper device driver for the adapter automatically, select the option Specify the location of the driver (Advanced) in the Add New Hardware window. Then click Next.

5.In the next window, click to remove the check mark next to the option Removable Media (Floppy, CD-ROM,...), then click Browse. In the Browse for Folder window, select the CD-ROM drive and double-click the directory WINME and then the DRV directory. Click Next to confirm your selection.

© Copyright IBM Corp. 2002 27