IBM 19K5716 manual Ndis WAN Capi driver installation in Windows

Although some older ISDN lines in Germany still use the D-channel protocol 1TR6, DSS1 is generally preferable. The 1TR6 protocol is no longer very common and might be removed from future device driver releases for this adapter.

13.After you have selected the appropriate D-channel protocol, click Continue.

14.The final window informs you which resources are used by the IBM International ISDN PC Card. Click Continue to complete the installation, then connect the ISDN cable.

Your IBM International ISDN PC Card is now ready to use with any CAPI 2.0- compliant software.

NDIS WAN CAPI driver installation in Windows 98

If you have not yet installed the CAPI 2.0-compliant device drivers, please return to the corresponding chapters and install them first.

Note: During installation you may be asked to specify the location of the NDIS WAN CAPI drivers a second time. In this case, simply enter the path to the driver source files again.

To install the NDIS WAN CAPI Driver in Windows 98, do the following:

1.Insert the CD labeled “IBM International ISDN PC Card Installation Software” into your computer's CD-ROM drive.

2.Click Start -> Settings -> Control Panel to open the Control Panel. Double- click the Network icon.

3.In the Network Configuration window, click Add.

4.In the Select Network Component Type window, click Adapter, then Add.

5.In the Select Network Adapters window, click Have Disk.

6.In the Install From Disk window, click Browse. Select the CD-ROM drive in the Drives list in the Open window, then browse to the path WIN98 \ NDIS. Click OK.

7.Click OK to close the Install From Disk, Select Network adapters, and Network dialogs.

24IBM ISDN PC Card:User’s Guide