IBM 19K5716 manual IBM Isdn PC CardUser’s Guide

When the CompuServe 2000 access software searches for a modem, it detects the IBM International ISDN PC Card as illustrated below.

Click Next to set up CompuServe 2000 with the selected modem emulation, and follow all further instructions displayed on your screen.

CAPI 2.0-compliant CompuServe 2000 in Windows 9x, Me with cFos installed

In some countries such as Germany and the UK, CompuServe ships its access software as “CompuServe 2000”. Unlike earlier versions, this software is designed to handle CAPI 2.0-compliant ISDN hardware.

To use CompuServe in Windows 9x or Windows Me with cFos installed, do the following:

1.After you have installed the CompuServe 2000 software, check the cFos configuration. To do so, click Start -> Programs -> cFos ISDN & DSL Driver - > Configure cFos. In the cFos Configuration program, click Configure MSN and parameters. If the parameter -kv appears in the additional parameters field, remove it. Then click OK. Select Save changes, click OK and then confirm that you want to restart your computer by clicking Yes.

2.After the system has restarted, verify that you have installed either the cFos ISDN, CompuServe or the cFos ISDN, X.75, Defaults, Mailbox Settings modem emulation. Make a note of the COM ports on which these modem emulations are installed.

3.Now you can start CompuServe 2000 and let it search for modems. The software detects your IBM International ISDN PC Card as illustrated below. Select the modem entry that corresponds to your cFos modem emulation.

106IBM ISDN PC Card:User’s Guide