7.This returns you to the previous window, which now displays the correct source drive and directory. Click OK.
8.The Found New Hardware Wizard informs you that appropriate device drivers have been found. Click the Next button. Windows 2000 begins the device driver installation.
9.When the ISDN - IBM International ISDN PC Card Setup window opens with the subtitle ISDN Switch Type or D-channel Protocol, select the appropriate protocol for your ISDN line. For newer ISDN lines in Europe, select European ISDN (DSS1), the Euro-ISDN D-channel protocol. NI-1 and 5ESS are D- channel protocols used in the United States of America.
10.After you have selected the appropriate D-channel protocol, click the Next button. If you selected Euro-ISDN, you can now enter MSNs (Multiple Subscriber Numbers). These numbers are used to identify individual ISDN terminal devices such as telephones and computers. when more than one device is connected to your ISDN line. (Due to an abbreviation error in Windows 2000, the term "Multiple Subscriber Numbers" might have been changed to "Multisubscriber Numbers". Please make your entries in the relevant fields despite this incorrect designation.)
11.The Found New Hardware Wizard informs you when the installation has been completed. Then click Finish to conclude the installation.
12.After the installation completes, connect the ISDN cable.
8. Installing the device drivers in Windows 2000 47
