IBM 19K5716 manual Implementations of the IBM International Isdn PC Card

Note: Note that you only can use two ISDN devices for a multilink connection. Configuring more than two devices may cause the connection to fail.

The second method is to modify an existing dial-up connection as follows:

1.Click Start -> Connect To and select the connection you want to modify. Right-click it and select Properties in the context menu.

2.On the General page in the properties window for the selected connection, select the additional device you wish to use for the multilink Internet connection from the list labeled Connect using. You can combine the following devices to create a multilink connection:

•cFos ISDN, Internet, Sync PPP over HDLC

•cFos ISDN, Internet, add. Sync PPP over HDLC

•IBM NDIS WAN CAPI Driver

11. Implementations of the IBM International ISDN PC Card 103