IBM 19K5716 manual Configuring multiple subscriber numbers MSNs

Note: If you activated either of the North American switch types NI-1 and 5ESS, you must configure the directory numbers and SPIDs separately. Do this by clicking Configure in the IBM International ISDN PC Card Properties window (see the illustration above). The following window opens in which you can select the ISDN line and where you type both the directory number (in the Phone number field) and the SPID. When you have done so, click OK to save the settings. The directory numbers and SPIDs for your ISDN line must be obtained from your ISDN service provider (telephone company).

6. Click OK and then restart the computer.

Configuring multiple subscriber numbers (MSNs)

Note: The following section describes how to add or change the configuration of Multiple Subscriber Numbers in the NDIS WAN CAPI device driver. Although MSNs can be configured in the device driver, you should enter MSN settings only in applications that require them. You must have the NDIS CAPI WAN device drivers installed in order to perform the

10. Configuration and diagnostics of the IBM International ISDN PC Card 59