accompanying the device driver contains complete installation instructions. The Windows 95/98 RAS server can use the CAPI Port modem ISDN RAS (PPP over ISDN) in the
•the same network protocols are installed and configured for RAS connections on both computers;
•you have configured the necessary user rights (RAS caller access, resource sharing, etc.).
See the Windows NT documentation for a description of the necessary steps.
If you use a
Legal notice
The ISDN CAPI Port Device Driver is commercial software owned by AVM GmbH, Berlin.
The ISDN CAPI Port Device Driver and accompanying documentation may not be offered, used, altered, or marketed, nor may any of its identifying characteristics be altered, as part of offerings of third parties, such as hardware and software manufacturers, unless written permission is obtained from AVM GmbH Berlin.
Appendix A:
Description of the registry commands
The ISDN CAPI Port Device Driver can be configured for individual requirements using the AT commands described in this section. To change the configuration of any of the virtual modems, proceed as follows:
1.Click Start -> Settings -> Control Panel -> Modems.
2.Select the desired modem.
3.Click the Properties button.
4.On the Settings page, click the Advanced... button.
5.Enter the AT command in the Extra Settings field.
To set more than one register, separate each individual register with semicolons followed by a space. Only the first command entered requires the prefix ”AT”.
Example: AT S31=2; S35=38400; S51=0
6.Confirm your entries by clicking OK and close the modem window.
13. ISDN CAPI Port Device Driver 189
