IBM 19K5716 manual Internet access in Windows Me, Creating a connection using one B channel

Note: In Europe you do not need to specify an additional phone number for the second B channel. If you leave this field blank, the number originally specified for the Dial-Up Networking connection will be dialed.

Internet access in Windows Me

Note: In order to use Dial-Up Networking for connections to the Internet, you

may need to install cFos. Please see “Installing cFos” on page 67 .

Creating a connection using one B channel

To create a connection in Windows Me using one B channel, do the following:

1.Click the Start -> Settings -> Dial-Up Networking to open the Network and Dial-up Connection window. Double-click the Make New Connection icon.

2.In the Connection Wizard's first window, click Next. If you have not yet entered any country-specific telephony information, the Location Information window opens, in which you can enter the pertinent dialing information.

3.In the Make New Connection window, enter the type and name of the computer to be dialed in the Name field. This is the name that will be used for the connection in Dial-Up Networking. Select any of the following devices to use for the connection to the Internet:

•cFos ISDN, Internet, Sync PPP over HDLC

•cFos ISDN, Internet, add. Sync PPP over HDLC

•NDIS WAN Line 1

•NDIS WAN Line 2

Click Next to continue.

11. Implementations of the IBM International ISDN PC Card 89