IBM 19K5716 manual Creating a connection using both B channels

Note: Since the NDIS WAN CAPI drivers are installed, you have the option of using “NDIS WAN Line 1” or the “NDIS WAN Line 2” for the Internet connection. However the choice depends on the Internet access software you want to use.

3.In the next window, enter the area code and phone number to dial. If necessary, change the country code. Click Next again. Finally, click Finish.

Now you can enter a user name and a password and dial up the connection to the server.

Creating a connection using both B channels

This technique is also referred to as "multilinking". Proceed as follows:

1.Create a new Dial-Up Networking connection as described in “Creating a connection using one B channel” on page 86 .

2.In the Dial-Up Networking window, click the new entry with the right mouse button.

3.Click the Properties command in the pop-up menu.

4. Click the Multilink tab. Select Use additional devices, and then click Add.

11. Implementations of the IBM International ISDN PC Card 87