
14. Removing the IBM International ISDN PC Card
The IBM International ISDN PC Card is removed in two steps from your Windowsbased computer:
•Remove any NDIS WAN CAPI Device Drivers installed
•Remove the CAPI
Removing the IBM ISDN PC Card from Windows 95, Windows 98, and Windows Me
To remove the IBM ISDN PC Card from Windows 95, Windows 98, and Windows Me, do the following:
1.Leave the IBM International ISDN PC Card in the PCMCIA slot. Disconnect the card’s ISDN cable from the ISDN Line.
2.Click Start -> Settings -> Control Panel to open the Control Panel.
3.
4.On the Configuration window page, select the NDIS WAN CAPI Driver in the list of network components.
5.Click Remove button, then OK. Confirm that you want to restart your computer.
© Copyright IBM Corp. 2002 | 207 |