IBM 19K5716 manual IBM Isdn PC CardUser’s Guide

Note: There is no diagnostics tool available for Windows 2000 Professional or Windows XP!

To run the diagnostics in Windows 95, Windows 98, Windows NT, or Windows Me, perform the following steps:

1.Click Start -> Programs -> ISDN PC Card, then click ISDN PC Card Test. If you are using Windows 95, Windows 98, or Windows Me, a message informs you that CAPI will no longer be available after testing until you restart your computer. This is not the case in Windows NT 4.0, since services can automatically be restarted without restarting the system.

2.Click Yes perform the diagnostic tests.

3.The diagnostics program then reports that the tests were completed. Click OK again.

4.Click Exit to close the diagnostics program.

Windows 95, Windows 98, and Windows Me users must complete the following steps in order to restart the IBM International ISDN PC Card's CAPI

2.0 device driver.

5.A message informs you that CAPI is no longer available. Click OK.

6.To reactivate CAPI, confirm that you want to restart your computer by clicking Yes.

66IBM ISDN PC Card:User’s Guide