IBM 19K5716 manual Creating a connection using both B channels

Note too that there are two entries called “IBM NDIS WAN CAPI Driver”. Each of these entries represents one B channel.

4.The next windows allow you to configure your Internet access. Perform the following steps:

•Enter the complete telephone number

•Enter a connection name

•Enter the User name and Password

5.When you have finished these operations, click OK in the Internet Properties window to complete your Internet access setup.

Once you have finished the configuration, you are ready to connect to your Internet Service Provider. Click Start -> Connect To, then select the connection you have created.

Creating a connection using both B channels

There are two ways to create a connection for multilink Internet access. The first is to create a new dial-up connection as described above in “Creating a connection using one B channel” on page 100 , but to select two devices to use for the connection rather than one as in Step 3.

102IBM ISDN PC Card:User’s Guide