12.To add alternate phone numbers to dial, click the Alternates button on the Basic window page, then enter the phone numbers.
13.To modify the modem settings, click the Configure button on the Basic page, then edit the modem properties as necessary.
14.Click the Server tab in the Edit Phonebook Entry window and make sure that TCP/IP is the only network protocol selected. (If any other option in the Network protocols group is checked, click it to remove the check mark.)
Note: The option Enable software compression may also be selected. Note that in rare cases this option can cause connection problems, however.
15.On the Server page, click the TCP/IP Settings button.
16.In the PPP TCP/IP Settings window, select the option Server assigned IP address.
17.Select the option Server assigned name server addresses.
18.Leave zeroes in the WINS server entries, activate both of the options at the bottom of the window, and click OK.
