Splash-Resistant Handset only | Panasonic KX- TG2583B instruction

CAUTION:

To reduce the risk of fire or injury to persons, read and follow these instructions

1 Use only the battery(ies) specified

2 Do not dispose of the battery(ies) in a fire They may explode Check with local waste management codes for special disposal instructions

3 Do not open or mutilate the battery(ies) Released electrolyte is corrosive and may cause burns or injury to the eyes or skin The electrolyte may be toxic if swallowed

4 Exercise care in handling batteries in order not to short the battery to conductive materials such as rings, bracelets, and keys The battery and/or conductor may overheat and cause burns

5 Charge the battery(ies) provided with or identified for use with this product only in accordance with the instructions and limitations specified in this manual

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THE BASE UNIT TO RAIN OR ANY TYPE OF MOISTURE ONLY THE HANDSET IS SHOCK AND SPLASH RESISTANT

*The AC adaptor is used as the main disconnect device, ensure that the AC outlet is located/installed near the unit and is easily accessible

Splash-Resistant (HANDSET ONLY)

The handset is designed to be splash resistant

You can use the handset with wet hands

CAUTION:

•Do not immerse in water or leave under running water.

•Keep the handset away from salt water

•Avoid exposure to prolonged high humidity

e Since water in headset jack may cause damage, close the headset jack cover when the optional headset is not in use When the optional headset is connected, do not use the handset with wet hands

•If the handset is wet, wipe with a soft dry cloth

•The base unit is not designed to be splash resistant Do not place the wet handset on the base unit

Shock-Resistant (HANDSET ONLY)

Although the handset is designed to be shock resistant, do not throw or step on the handset

Image 81

Panasonic KX- TG2583B manual Splash-Resistant Handset only, Shock-Resistant Handset only

Contents

Panasonic World Wide Web address http//www Panasonic corn Accessories included Before Initial UseAttach your purchase receipt here For your future reference Battery Charge For Best PerformanceBase Unit Location/Noise Contents Intercom Location of Controls Base unitAntennas p 3 Button p Caller ID indicator P 31 Answer on Indicator p 56, 57 Ii?&@ Button p19,37 STOP/EXITB u t t o n p 19, 34, 48, 56 Handset Standby mode Displays@fYz2!q Connections Settings Recharge Battery strength Battery information Settings Press @ or Q to select Pulse or Selecting the Dialing Mode Selecting the Line Mode ~ogram=yesPress fTJ or @ repeatedly until the arrow points to Program Make sure the unit is in the standby mode initially Programmable FunctionsDuring programming Press Q or @ repeatedly until the arrow points to Program Setting the Auto Talk FeaturePress Q or @J repeatedly until the arrow Press Q or Q to select On or off Selecting the Ringer Volume With the handsetStep To select High or LOW, press With the base unitTo turn the ringer OFF, press and hold To turn the ringer ON, press Preparing the Answering System w When finished, press STOP/EXITGreeting Message To record a greeting message Greeting message sample To adjust the speaker volumeTo erase the recorded greeting message Pre-recorded greeting message Key Programming Summary for the Answering System Day and Time Adjustment Press @ or &J repeatedly until the arrow points to ProgramVPress l5J Ime will $ Selecting the Caller’s Recording Time Press @ or @ repeatedly until the arrow Points to ProgramPress @I or @ repeatedly until the arrow Points to TAD Selecting the Number of Rings Toll saverPress a, or @ to !?J to set the number of rings With the Handset Making CallsIf noise interferes with the conversation To redial the last number dialed on the handset To dial after confirming the entered number To adjust the receiver volume while talkingTo redial after confirming the last number dialed Lighted handset keypad With the Base Unit Digital Duplex Speakerphone Making Calls To redial the last number dialed on the base unit To adjust the speaker volume 8 levels while talkingTo put a call on hold To release the hold Useful information SimultaneousKeypadDialing Answering Calls IndicatorAuto Talk With the Base UtIit Digital Duplex Speakerphone How caller information is displayed when a call is received Caller ID Service While the handset is off the base unit To check the number of new calls Viewing the Caller List Using the Caller List Calling Back from the Caller List What 4 meansIf a caller calls more than once Editing the Caller’s Phone Number While the arrow points to EditPress FWD/EDIT @ Edit key to select a pattern @ Fred Parker @&I Pattern New calls TA b=Directorb StoringCallerListInformationintheDirectory To erase a specific caller from the Caller List ErasingCallerListInformation To erase all entries in the Caller List Press FWD/EDIT @ Yes key or INTERC~M/CLEARBeep sounds and all entries are erased StoringaPhoneNumberintheDIRECTButton One-Touch Dialer Press Talk Dialing the Stored Number in the Direct Button Using the Directory Storing Names and Numbers in the Directory@, @, BACK@ Using the Directory If you make a mistake while entering a name Selecting Characters to Enter Names While the arrow points to save For example, to enter Tom Jones To search for a name by initial Finding Items in the Directory @ Press @ repeatedly until the name is displayed Press &I or Q to enter the directory list Press @ or Q Index table Dialing from the DirectoryWith the handset With the base unit Press Digital SP-PHONE Editing an Item in the Directory Press @ or @ repeatedly to findAdd a number to the current number Erasing an Item from the Directory You can erase an item using the handset or the base unit@ to enter the directory list Press Q or &J Press @J or @J to enter Directory list Paging the base unit from the handset IntercomPaging the handset from the base unit Handset locator Intercom is displayed *To stop paging, press From the handset to the base unit Transferring a Call Using the IntercomFrom the base unit to the handset Base unit During a call, press Automatic Security Code Setting Special FeaturesFor Call Waiting Service Users How to Use the Pause Button TemporaryToneDialing For Rotary or Pulse Service UsersFLASHButton Selecting the flash time Automatic Answering Operation Setting the Unit to Answer CallsMonitoring incoming calls Press Answer on to turn on the answering s y s t e m Listening to only new messages Listening to MessagesListening to all recorded messages During playback 3rWhen finished, press For Caller ID service users pFrom the Handset To call back the displayed number Erasing a specific message Erasing MessagesErasing all messages Within 5 seconds, press ERASE/~LEAI~ again Summary of remote operation Remote Operation from a Touch Tone Phone Enter a remote code using a 2-digit number Setting the Remote CodeTo check the remote code Repeat steps 1 to VoiceMenu Shaded boxes are voice prompts$ Press Q Press CiJ Press @ New Message Playback All Message PlaybackRecording a Memo Message Erasing All Messages DirectRemoteOperation Direct commands Skipping the greeting message Turning on the answering systemUnit hangs up and will not answer Calls until turned on again Voice menu Remote Operation with the Handset All recorded messages are erased Message will be played During playbackAnswer off is heard and the answerina System is turned off Upward Wall Mounting Place the handset in the cradle as shown To charge the handset battery Using an Optional Headset Using the Belt ClipConnecting the headset to the handset To attach the belt clip To remove the belt clip Battery Replacement Handset display If the Following Appear Base unit display Before Requesting Help Cordless Telephone ProblemRemedv ProblemRemedy Problem Remedy Answering System ProblemRemedyMemory is full Erase some, or all, Playback Resume playback, press After hanging up Recharge battery iS General Problem Remedy Adding Another Phone Important Safety Instructions Splash-Resistant Handset only Shock-Resistant Handset onlyDo not immerse in water or leave under running water OIB FCC and Other InformationPage One Panasonic Way, Secaucus, New Jersey For product service Connect as shown Charge the battery for about 6 hours before initial use Raise the base unit antennas for best reception How to Operate the Unit To dial a stored number in the Direct button olRECTsix + To store a phone number in the Direct buttonPress Talkj Press Digital SP-PHONEand talk into the MIC To enter names and symbols To store names and phone numbers in the directoryTo dial from the directory To leave the directory list, press STOP/EXIT Press Digital w-PHoNEj You can check who has called as follows Ex. When you search from the most recent callTo exit the Caller List, press To call back from the Caller List @ Setting the day/time @ Selecting the caller’s recording time@ Selecting the number of rings before the unit answers To play back new messages, press NEW Message BneflyTo erase all messages, press ERASE/CLEAR twice Pnnted In Malaysia II..II . . . . . . ll..l.l..II.l.l..I.I...II...l..lll..,l LOOZ-LUU-008-L OWN a @ Panasonic., 0 4u*ac 0 Technics Customer Care Plan Offers ALL of These Outstanding Benefits