Panasonic KX- TG2583B manual Selecting the Line Mode, ~ogram=yes

r) Settings

Selecting the Line Mode

If the line is connected to a low voltage system such as a PBX, set to “B” Otherwise the Call Waiting Caller ID Feature may not be used (p 54) Your phone comes from the factory set to “A”

Use the handset near the base unit.

Make sure the unit is in the standby mode initially.

1

2

3

4

5

6

7

Press (FUNCT~ON/EXIT/CH)

Press fTJ or @ repeatedly until the arrow points to “Program"

Press FWD/EDIT @ (Yes key)

Press @ or &I repeatedly until the arrow points to “Set line mode"

Press FWD/EDIT @ (Yes key)

Press Q or Q to select “B" or "A"

Press FWD/EDIT @ (Save key) *A beep sounds

*To return to the standby mode, press

(FUNCTI~N/EX~T/C~~)

1:~ogram)=yes /

-1

)Set line mode Set dial mode

TAb=Yes

Line mode

:B

VA F=Save

Line mode

:B

*YOU can exit the programming mode any time by pressing (FUNCTION/EXIT/CH) *If the handset has lost communication with the base unit, 3 beeps sound and ‘hro

link to base Place on cradle and try again “isdisplayed

14