Programming
Registering a unit
Operating additional units
Additional handsets
Up to 6 handsets can be registered to the base unit.
Important:
RSee page 4 for information on the available model.
Registering a handset to the base unit
The supplied handset and base unit are
1Handset:
MMENUN
2MbN: “Initial setting” a MOKN3 MbN: “Registration” a MOKN
4 MbN: “HS registration” a MOKN5Base unit:
Press and hold MLOCATORN for about 5 seconds until the registration tone sounds. R If all registered handsets start ringing,
press MLOCATORN again to stop, then repeat this step.
R The next step must be completed within 90 seconds.
6Handset:
Press MOKN, then wait until a long beep sounds.
Note:
R While registering, “Base in registering mode” is displayed on all registered handsets.
RWhen you purchase an additional handset, refer to the additional handset’s installation manual for registration.
Deregistering a handset
A handset can cancel its own registration to the base unit, or other handsets registered to the same base unit. This allows the handset to end its wireless connection with the system.
1MMENUN
2MbN: “Initial setting” a MOKN
3 MbN: “Registration” a MOKN
4 MbN: “Deregistration” a MOKN 5 335 a MOKN6Select the handset(s) you want to cancel by pressing the desired handset number (1 – 6). a MOKN
R The selected handset number(s) flashes.
R To undo a selection, press the handset number again. The number stops flashing.
7MbN: “Yes” a MOKN
8 MOFFN
For assistance, please visit http://www.panasonic.com/help | 21 |