RCA CC643 manual Playback Operation and How to Copy Tapes on the VCR, Press PLAY/PAUSE

Playback Operation and How to Copy Tapes on the VCR

1. A. Camcorder connected directly to TV: Turn on the TV and tune it to the video input channel.

B. Camcorder connected to VCR that

is already connected to TV: Turn on VCR and place it in the "line"

or "camera mode". (If your VCR does not have a "line" or "camera mode", consult the VCR owner's

manual.) Operate the TV as you normally do to see the signal coming from the VCR.

2.Place the POWER switch in VCR to

turn on the camcorder. The power indicator will light.

3.Press PLAY/PAUSE.

•During playback, use the playback features on pages 59-61.

. To copy what the camcorder is playing, place a blank cassette in the VCR, and press the VCR's RECORD button.

Note: Make sure the memory-stop feature

is turned off (press COUNTER R/M) or the

camcorder will enter play pause when the counter reaches M 0:00:00.

5. Press STOP when you are finished.

Viewing What the Camcorder is Seeing (or Recording):_:_................................................

1.A.

B.

Camcorder connected directly to TV: Turn on the TV, and tune it to the video input channel.

Camcorder connected to VCR that

is already connected to TV: Turn on VCR and place it in the "line"

or "camera mode". (If your VCR does not have a "line" or "camera mode", consult the VCR owner's

manual.) Operate the TV as you normally do to see the signal coming from the VCR.

2.Place the POWER switch in

CAMERA.

Note: When the camcorder is used as a camera, turn the TV's volume down to

prevent a high-pitched squeal caused by feedback.

3.Press the thumb trigger to begin

recording. You can watch what the

camcorder is seeing (or recording) on the TV screen.

63